The MiniTT1 transmitter is a low-profile unit that slides directly into the camera’s hot shoe. It takes the complex TTL flash data sent through the camera’s hot shoe contacts and transmits it in a secure, unique PocketWizard radio signal. Flash units must be mounted on a FlexTT5 transceiver (ordered sepretaly) for TTL operation or any PocketWizard unit for manual operation. Shoot up to 1/8000 sec. with high-speed flash sync or up to 1/500 sec. with full power flash using exclusive PocketWizard HyperSync. Unique ControlTL system enables shooting remote autoflash at up to 8fps. This is an Amazon’s product review. Checkout more details bellow.
 |
Technical Details
- Full ETTL II /iTTL Autoflash and Ratio flash and exposure tracking
- FP/High speed flash synch up to 1/800th sec.
- Autoflash sequences up to 8 frames per second
- Triggers flash or cameras
- Works with all Pocket Wizard 32 channels and zones
As all communication takes place through the dedicated hot shoes, there is no need for cables, brackets, Velcro or tape to use them. The MiniTT1 transmitter can be used for TTL auto flash up to 800 feet and conventional triggering up to 1200 feet. The unit feature a two-position channel selector that is factory programmed to the PocketWizard classic channel one and two. Using the included software and USB port, you can program either channel to any of the PocketWizard system’s 32 digitally encoded channels and four zones. A special Learning Mode enables simple, in-the-field programming of all channels.
About the MiniTT1-Nikon
The smallest PocketWizard radio ever, the MiniTT1 Transmitter is part of a new generation of PocketWizard radios providing i-TTL and power control capabilities with Nikon Speedlights and select studio lights. Your creativity also extends far beyond X-Sync speeds with HyperSync and FP Sync capabilities.
The MiniTT1 locks onto the camera’s hot shoe, supporting an on-camera flash with its own hot shoe while working with remote PocketWizard units. Remotes can be one or more PocketWizard FlexTT5 Transceivers connected to Nikon CLS / i-TTL flashes or any PocketWizard Receiver for triggering flash or remote cameras.
The MiniTT1 Transmitter is easy to use; just slide in place and begin to shoot. The new PocketWizard ControlTL System interprets the complex CLS / i-TTL data being sent through the camera’s hot shoe and digitally transmits it in a reliable radio signal. Change the exposure compensation dial on the camera, and those commands pass seamlessly through the system to your remote flash. Adjust your aperture or ISO and the system automatically corrects for those changes.
Add the PocketWizard AC3 ZoneController to easily adjust up to three zones of light independently, in both i-TTL or manual. PocketWizard ControlTL radio communication allows you to shoot farther, faster, around corners, through walls even at high noon in bright daylight. Now you can deploy a wireless i-TTL flash system wherever you want, without infrared limitations, in seconds.
With PocketWizard’s patent pending HyperSync™ Technology, the FlexTT5 allows you to use sync speeds beyond your camera’s x-sync, up to 1/8000th of a second with some camera/strobe combinations, giving you the control you’ve always been looking for. With ControlTL Firmware Upgrade 6.0, HyperSync is automated and HyperSync timing is now adjusted in two seperate places – on the transmitter and on the receiving ControlTL radio. The transmitting or on-camera MiniTT1 or FlexTT5 automatically adjusts HyperSync to compensate for changes made to shutter speed. Photographers can further refine HyperSync via the PocketWizard Utility. Learn more
HyperSync Automation at wiki.pocketwizard.com/hypersync.
ControlTL also enables High Speed Sync / FP mode automatically when paired with compatible Speedlights. With HSS Sync engaged in the camera menu, select any shutter speed you want with your Nikon i-TTL flashes, all the way up to 1/8000th of a second. With wireless radios, the possiblities of FP Sync becomes a lot more exciting. Need to overpower the Sun? Now you can.
Use the MiniTT1 with the PowerST4 Receiver, PowerMC2 Receiver, or AC9 AlienBees Adapter on a FlexTT5 and get remote power control with your Elinchrom RX or any Paul C. Buff flash.
Use the MiniTT1 for standard triggering with any PocketWizard Receiver including the FlexTT5, Plus II or MultiMAX. Yes, you can intermix i-TTL flash with any manual flash extending your lighting possiblities.
The MiniTT1 works on the powerful ControlTL platform and can be configured via the PocketWizard Utility. The PocketWizard Utility download is provided to support the MiniTT1 via a USB port. The Utility allows you to configure your channel settings, dial in your HyperSync timing, adjust your sleep-mode timers and update your product to the latest firmware.
The PocketWizard MiniTT1 Transmitter is the start of a new era in wireless trigger control.
That’s all about the PocketWizard MiniTT1 Radio Transmitter For Nikon TTL Flashes And Digital SLR Cameras. This PocketWizard MiniTT1 Radio Transmitter is available in Amazon.com. You can directly order or buy from here.
Source
[ttjad keyword=”dslr-camera”]
