TTJ Poll

After Note 7 Disaster what are your thoughts on Samsung Mobile?

View Results

Loading ... Loading ...

Johnny Franks, the famous iPhone hacker has now released a custom bundle to jailbreak iPod Touch 4G and iPad on iOS 4.3.This bundle can be used to jailbreak an iPod Touch and iPad with the existing version of PwnageTool 4.3 and to build a custom jailbroken firmware file.As everyone might know that Cydia is compatible and fully working with iOS 4.3 beta, hence this is a tethered jailbreak. So you will have to restart your iPod Touch and iPad on every reboot.


This is an unofficial release of PwnageTool 4.3 with custom bundles. As this is not an official release from Dev-Team we won’t recommend everyone to carry on with this tutorial. Only advanced users who know what they are doing are recommended to proceed with this tutorial at their own risk. We are not responsible for any data or loss or bricking of your idevice.


* PwnageTool 4.1.2
* Access to iOS 4.3 Beta firmware
* iTunes 10.1.1
* Mac OS X
* PwnageTool bundle for iPhone 4, iPad or iPod touch 4G

The steps are as follows:

Step 1: Download PwnageTool bundle for your version of iOS device. Extract the .zip folder, in there you will find two files: CydiaInstaller.bundle and a .bundle file, for this guide, we are using iPhone 4 bundle iPhone3, 1_4.3_8F5148b.bundle. Move all these files to your desktop.

Step 2: Download PwnageTool 4.1.2 and copy it to your desktop. Right click, and then click on “Show Package Contents” as shown in the screenshot below.

Step 3: Navigate to Contents/Resources/FirmwareBundles/ and paste iPhone3, 1_4.3_8F5148b.bundle file in this location.

Step 4: Now navigate to Contents/Resources/CustomPackages and here replace the CydiaInstaller.bundle file with the version that you downloaded in Step 1, and then simply close this folder.

Step 5: Download iOS 4.3 Beta and move this file to your desktop.

Step 6: Start PwnageTool in “Expert mode” and select your device.

Step 7: Browse for iOS 4.3 beta firmware for your device.

Step 8: Now select “Build” to start creating custom 4.3 firmware file.

Step 9: PwnageTool will now create the custom .ipsw file for your iPhone which will be jailbroken.

Step 10: Once you have created the custom firmware, quit PwnageTool. Don’t restore to this firmware yet.

Step 11: Download by DjayB6, extract the file, and move the folder to your desktop.

Step 12: Now open file, and edit the paths required in a program like TextEdit.

Step 13: Now start Terminal and run the following commands:

cd desktop

cd ramdisk_maker


Step 14: First, create a folder on desktop named My_Ramdisk. Then change the extension of the original iOS 4.3 Beta file from .ipsw to .zip, and then extract this .zip file.

Step 15: Here you will see a file named 038-0408-002.dmg. This is the file we need. Copy this file to My_Ramdisk folder that you created on desktop.

Step 16: Once you have done that, you will notice that Terminal screen will automatically move to the next step.

Step 17: Now go to ramdisk_maker folder that you saved earlier on desktop, here open the file Options.plist in a program like TextWrangler (available for free on the Mac App Store). Here change the value under SystemPartitionSize to 1116.

Step 18: Now save this Options.plist file and move it to My_Ramdisk folder. At this point, you will once again notice that Terminal will automatically move to complete the process.

Step 19: Once done, you will now notice a new file named final_ramdisk.dmg in My_Ramdisk folder. Rename this file as 038-0408-002.dmg.

Step 20: Now change the extension of the custom iOS 4.3 Beta firmware file that you created earlier from .ipsw to .zip, and then extract this .zip file.

Step 21: Here, replace 038-0408-002.dmg file with the one you created in Step 19 above.

Step 22: Now select all files, and click on “Compress 9 Items” so that it is converts back into .zip file. Now change the extension of this .zip file to .ipsw and you are done making the custom firmware, with fixed ramdisk.

Step 23: Start iTunes, click on your iOS device icon from the sidebar in iTunes. Now press and hold left “alt” (option) button on Mac, or Left “Shift” button if you are on Windows on the keyboard and then click on “Restore” (Not “Update” or “Check for Update”) button in the iTunes and then release this button.

This will make iTunes prompt you to select the location for your custom firmware 4.3 file. Select the required custom .ipsw file that you created in Step 22 above, and click on “Open”.

Step 24: Now sit back and enjoy as iTunes does the rest for you. This will involve a series of automated steps. Be patient at this stage and don’t do anything silly. Just wait while iTunes installs the new firmware 4.3 on your iOS device. Your iOS device screen at this point will be showing a progress bar indicating installation progress. After the installation is done, your iPhone, iPad or iPod touch will be jailbroken on iOS 4.3.

Step 25: Download utility for Mac OS X and extract the .zip file.

Step 26: First, we will need three files from the original iOS 4.3 Beta firmware namely: kernelcache.release.n90, iBEC.n90ap.RELEASE.dfu, and iBSS.n90ap.RELEASE.dfu.

Change the extension of the original iOS 4.3 Beta file from .ipsw to .zip, like you did in Step 14 above, and then extract this .zip file.

Now copy kernelcache.release.n90 file, and then copy iBEC.n90ap.RELEASE.dfu, and iBSS.n90ap.RELEASE.dfu files which are found under /Firmware/dfu/.

Move all these three files, and tetheredboot utility to a new folder named “tetheredboot” on the desktop.

Step 27: Now to boot your iPhone, iPad or iPod touch into tethered mode, connect it with your computer and start it in Recovery Mode by holding Home and Power buttons until the connect to iTunes screen appears on your device.

Step 28: Start Terminal and run the following commands:

sudo sh

enter your administrator password, then:

cd desktop/tetheredboot

./tetheredboot iBSS kernel

Now wait for your device to boot, Terminal at this point will be showing “Exiting libpois0n” message. After a short while, your iPhone, iPad or iPod touch will be booted in a jailbroken tethered mode !

That’s all.


Click on Ads to buy

PwnageTool Bundle for Jailbreaking iPod touch 4G On iOS 4.3 Is Available for Download

Acer Four-Core Tablets Coming
You can also press the left/right arrow key on your keyboard to go to previous/next post
  On January 18, 2011(6 years, 5 months ago.)

You May Also Like:

What Do You Think?

1 Response

  1. PwnageTool Bundle for Jailbreaking iPod touch 4G On iOS 4.3 Is Available for Download | Says:

    […] You can found complete step by step guideline to jailbreak using this tool from here. […]

    Posted on January 18th, 2011 at 12:15 PM

Leave a Reply

Loading Facebook Comments ...

FTC Disclosure: Some of the links of this website are "affiliate links." This means if you click on the link and purchase the item, we will receive an affiliate commission.

Recent Search

Recent Tutorials

There is a high-risk XSS Vulnerability in W3 Total Cache, and we have got the guide to the fix for you.
Check out this tutorial to know how to install Apple watchOS 3 beta certificate on your Apple Watch and start enjoying the new version.
If you are trying to jailbreak iPhone, iPad or iPod on iOS 9.2 - 9.3.3 without using a computer or Apple ID, then check this video tutorial.
Pokemon Go users are complaining about the crashing and server issues. Check out the tutorial to solve error problems and thanks us later.
Turning off Wi-Fi Assist is a great way to save mobile data since it automatically starts using cellular data when Wi-Fi signal is poor .
If you want to secure your SIM card from others using it, then check out this tutorial to know how to set up the SIM Pin code on your iPhone.
CiderTV is a great alternative to control Apple TV from the Notification Center. Check out this tutorial to set up CiderTV on your iPhone.
Are you annoyed by the split screen mode on the iPhone 6 Plus or 6s Plus? Check out this quick tutorial to turn off split screen feature.
If you could not wait to installed the iOS 10 beta version on you iPhone and now struggling for the errors, then this tutorial is for you.
Siri might not understand the question you asked. But you can use Siri by editing the text that you asked & it will give an updated answer.
Close You Have To Login
Login With »Login With TwitterLogin With Facebook