Apple has just released the iOS 5 beta 5 firmware for developers and it is now available to download for iPhone, iPod Touch or iPad and also this update brings the obvious bug fixes and stability improvements. Just like the iOS 5 beta 4 firmware update you can update to the iOS 5 beta 5 firmware Over-The-Air and if you do decide to update to the iOS 5 beta 5 firmware over-the-air. Apple has also improved the Camera app, Photo app,mobile Safari browser, Mail and Calendar app in iOS 5 and Apple is recommending developers to first erase all content and settings on the iOS device……………..
Apple has released the fifth version of its iOS 5 beta to developers and the new version offers some stability improvements and bug fixes and is the second version of Apple’s beta software to be delivered over-the-air to devices, a new feature that Apple touted at WWDC as part of its new post-pc strategy. The iOS 5 update also proceeds to re-download all of the music purchased from iTunes to your phone when you restore from an iCloud backup, something Apple reported would be available but had yet to make an appearance, until now. In addition to iOS 5 beta 5, Apple has also released iTunes 10.5 beta 5 and Xcode 4.2 beta 5 as well as beta 4 of the Apple TV software update. The OTA update clocks in at 128mb for those that installed iOS 5 beta 4. As with beta 4, you can install iOS 5 beta 5 using over the air software update. In order to do so you must first erase all content and settings on your device by choosing Settings > General > Reset > Erase All Content and Settings. Note that this will erase everything on your device, so make sure that you have it backed up. You can then update OTA on any device running iOS 5 beta 3 and newer by visiting Settings>General>Software Update.
If you’d rather not erase your device, you can also choose to update using the standard method by downloading iOS 5 beta 5 and updating your device via iTunes. Note that Apple adds a strong warning to those who are not using devices intended for development not to install iOS 5 b5.
This version of iOS is intended only for installation on development devices registered with Apple’s Developer Program. Attempting to install this version of iOS in an unauthorized manner could put your device in an unusable state, which could necessitate an out of warranty repair.
WiFi hotspot functionality should be available again as it has been restored in beta 5. If you choose to update via iTunes you should back up your device using iTunes 10.5 beta 4 first, then update, then restore your device to your backup using iTunes 10.5 Beta 5 or your iCloud backup. The fairly annoying bug that prevented mail from being attached has been fixed, as has the a bug that prevented applications from updating location data in the background. Several changes have also been made to Core Image, adding additional filters for developers to use including new blending modes, darkening, hue adjusting, gradients, luminosity, saturation and transformation controls. This greatly extends the capabilities that Core Image provides to developers as part of the standard frameworks and should assist those who don’t wish to build their own. The iOS 5 beta is available for download now on the Apple Developer site. Note that Apple requires that you have a developer account and a device registered on the site in order to download and install iOS 5. iOS 5 beta 5 has just been released with xCode and many other tools for the developers in below you will got the full change log for you to feast your eyes on.
- When creating an iCloud account, you can use any Apple ID as long as it is a full email address and not a MobileMe account. If you have a MobileMe account, you can move that account to iCloud. You can find more information on iCloud at: http://developer.apple.com/icloud
- When setting up an iCloud or MobileMe account using the setup assistant and leaving Find My iPhone on, it might actually turn Find my iPhone off after the setup. Please verify in Settings/Mail, Contacts, Calendar/YourAccount that Find my iPhone is toggled On after leaving the setup assistant.
- NEW: Enabling iCloud services in Setup Assistant may not always be saved correctly. After completing Setup Assistant you should visit Settings > iCloud to verify the state of the iCloud account. If you have multiple iCloud or MobileMe accounts configured on the device you should also visit each of those accounts in Settings > Mail, Contacts, Calendar to verify each account.
- It is recommended that you disable Bookmarks on multiple accounts. If they are enabled, the results might be undefined.
- Starting in iOS 5, video content in applications and websites are AirPlay-enabled by default.
- iOS 5 supports AirPlay of video via AV Foundation.
- Apple TV Software beta enables users to mirror the contents of an iPad 2 to an Apple TV (2nd generation) using AirPlay. This beta software also enables Photo Stream on Apple TV so users can access photos stored in iCloud. Apple TV Software beta is being provided to test the latest AirPlay functionality with your iOS 5 apps and web sites. If you wish to install Apple TV Software beta on your device, you must first register your device UDID in the iOS Developer Program Portal.
- Birthday calendars are not currently available via the
icloud.comwebsite or in Windows. They will be available in a future release.
- NEW: The default calendar is still the On My iPhone calendar despite setting up an iCloud account during Setup Assistant. As a workaround, reset the default Calendar after finishing Setup Assistant in Settings > Mail, Contacts, Calendar > Default Calendar.
- NEW: Pushing iCloud Calendar data is not working in iOS. To sync your iCloud Calendar, launch the Calendar app or refresh the calendars manually using the Calendars button in the top left corner.
- Several filters have been added since beta 1. The current list now includes the following filters:
- Match data for turn based matches is currently limited to 4 KB of data.
- NEW: When logging in to Game Center, the password may clear and login may not complete. Trying a second time will succeed.
- NEW: In this beta, GameKit Invites may fail. As a workaround, try restarting the device.
- iBooks 1.2.2 may fail to display some text or images in books. Please update to iBooks 1.3 in the App Store.
- As this is beta software, it is recommended that you do not use the iCloud services to store any critical data or information. If you enable iCloud Backup, automatic backup with iTunes when syncing will be disabled. We also suggest that you manually back up your device with iTunes. Backups made with earlier versions of iOS 5 beta will soon become incompatible, and will no longer be available. It is strongly advised you upgrade to this version of the iOS 5 beta in order to continue backing up your devices. If you encounter errors restoring from a backup, or enabling a backup more than one hour after signing into iCloud, try deleting your iCloud account from Settings and adding it back. If errors persist, please try erasing your device and initiating the restore again.
- During the iOS 5 beta period, any documents stored on the servers might be purged periodically before GM. Therefore, it is highly recommended that you do not store any critical documents or information on the servers.
- NEW: Provisioning Profiles no longer need to be enabled for iCloud in the iOS Provisioning Portal. All newly generated provisioning profiles are now automatically enabled for iCloud. If you are using an Xcode managed Team Provisioning Profile, click refresh in the Xcode Organizer to obtain a new iCloud-enabled profile. To enable all other provisioning profiles for iCloud, simply regenerate your profiles in the iOS Provisioning Portal.
- If your application is using the
NSMetadataQueryclass, you must set a predicate, even though the predicate itself is ignored.
- In this beta, the
NSMetadataQueryis not supported.
- FIXED: To use iCloud prior to beta 5, you had to manually specify various container identifiers (your application’s Display set) within an Entitlements file for both of your Mac OS X and iOS projects.Starting in beta 5, to enable iCloud storage within your apps, simply click the “Enable Entitlements” checkbox in the Summary pane of your project. Xcode will create a custom entitlements file for your project that automatically includes your Team ID. You can add additional iCloud Container values as required by your application. (Note that you must regenerate your existing provisioning profiles, either with Xcode or in the iOS Provisioning Portal, to use iCloud storage.)If you specify a custom identifier string for your iCloud Key-Value Store or iCloud Container entitlement values, you no longer need to prepend your Team ID to the beginning of the string. Xcode will prepend your Team ID to these entries automatically
- The container identifier string you pass to the
NSFileManagerMUST include the team ID at the beginning of the string. As a convenience, if you pass
nil, Foundation uses the first document container ID specified in your app’s entitlements.
- There are issues using the Cloud Storage document API in conjunction with protected data which can lead to data corruption.
- FIXED: In this beta, document-based applications cannot always detect when files change, move, or are deleted out from underneath them.
- In this beta, file presenters (objects that adopt the
NSFilePresenterprotocol) do not receive some of the messages that they’re supposed to receive, especially:
You can workaround this by implementing the
relinquishPresentedItemToWriter:method and checking to see if the writer actually wrote when your file presenter reacquires. You can also use FSEvents to observe file system changes
- In this beta, messages about changes to files in a directory are not getting delivered to objects that adopt the
- While reporting a bug related to the iCloud storage interfaces, please include the logs collected during your debugging session. To generate these logs, you must install a special debug profile on your device.The debug profile can be obtained from http://connect.apple.com. This profile enables the generation of debug logs that are needed to diagnose any problems using iCloud storage. The instructions to collect the logs are:
- Install the profile. (The easiest way to do this is to mail it to yourself and open the attachment on their device.)
- Reproduce the bug.
- Sync with iTunes to pull the logs off your device.
- Attach the logs to your bug report. You can find the logs in
These logs can grow large very quickly, so you should remove the profile after you have reproduced the problem and pulled the logs for the bug report.
- NEW: File names are case-insensitive in OS X but case-sensitive in iOS. This can lead to problems when syncing files between the two. You should take steps on iOS to avoid creating files whose names differ only by case.
- iMessage beta 1 will be unable to communicate with iMessage users on beta 2 or later.
- NEW: When using the volume buttons on the device, or on headphones, the volume slider in the UI of applications may not update even though the volume level has changed.
- The version of iTunes that comes with beta 5 cannot sync devices that have the beta 4 software installed. To avoid this problem, do the following:
- Sync any devices that have beta 4 installed to the version of iTunes that came with beta 4.
- Upgrade iTunes to the version that comes with beta 5.
- Connect the device and install the beta 5 software. (Understand that you might see a failure to sync error when you first connect the device.)
- After installing the beta 5 software, restore from your the backup you made in step 1.
- Videos purchased from the iTunes Store do not play on a 2nd generation AppleTV over AirPlay with iTunes 10.5.
- FIXED: The
CLLocationManagerdoes not cause applications to be resumed or launched in the background for significant location change updates. However, if a backup from a previous software version (where an application was monitoring significant location changes) is restored to the device, significant location change monitoring will continue to cause that application to be resumed or launched in the background.
- FIXED: Forwarding a message with attachments included does not attach the file and the message compose screen does not change from “Loading….”
- NEW: When changing the host name of an email account in settings, blank messages may be seen in the unified inbox. As a workaround, delete and re-add the account instead of changing its host name.
- FIXED: Some songs are missing their album artwork after changing the device library via syncing.
- FIXED: In iOS 5.0 beta 4, several OpenGL ES extensions have been moved from the APPLE namespace to the EXT namespace, causing some API to be renamed. The altered extensions are EXT_color_buffer_half_float,EXT_occlusion_query_boolean, EXT_separate_shader_objects, EXT_shadow_samplers, EXT_texture_rg, EXT_debug_label, and EXT_debug_marker.
OTA Software Update:
- If you are doing an OTA software update, you will need to re-sync your photos with iTunes.”
- FIXED: In this beta, iPhone 4 device cannot join personal hotspot even if it is on due to a non functional Wi-Fi tethering on these devices.
- FIXED: If you apply red-eye adjustments in iOS, and import your image into the iPhoto seed build, the red-eye adjustments will not appear on that image in iPhoto. As a result, subsequent syncing of your image back to the iOS device from iPhoto will not show the red-eye adjustments.
- NEW: When restoring photo libraries from an iTunes backup, some photos may not appear in the Photos application after restore. Please back up your photos before updating to iOS Beta 5.
- Location services are not functional in iOS 4.3 simulator running on Mac OS 10.7 with Xcode 4.2.
- Push and local notifications for apps appear in the new Notification Center in iOS 5. Notification Center displays notifications that are considered “unread.” In order to accommodate push and local notifications that have no “unread” status, developers can use their application badge count to trigger a clearing of notifications from Notification Center. When an application clears its badge count (by setting it to zero), iOS 5 will clear its notifications from Notification Center.
- FIXED: iOS 5.0 terminates VoIP applications that are resumed in the background for incoming network traffic with extreme frequency. Developers are encouraged to make sure all incoming data is read from VoIP sockets to avoid this condition.
- NEW: The
UIPrerenderedIconkey (in the
Info.plistfile) is not honored in this build.
- NEW: In-App purchase will not work for developers testing their apps with the iTunes Sandbox.
- FIXED: When tweeting your location from Safari and exiting before the location can be established, the location arrow will stay in the status bar. The arrow can be removed by killing Safari from the task switcher.
- FIXED: Instruments overwrites the loaded automation script, even if another program is editing it.
- FIXED: The play and record buttons in the Automation instrument script editor may not work properly after targeting an application that was launched by a trace session and has ended. They may also not work if you target an application that was suspended. If you run into this problem and it persists, you may need to close and reopen the trace document to get back into a functional state.
- FIXED: When capturing actions into a script using the Automation instrument, interfaces with web views or table cells that contain a high number of off screen elements may take an extremely long time before returning with an expression.
UIATargethave been replaced with the
- Starting in iOS 5 beta 2, you can now trigger the execution of an UI Automation script on an iOS device from the host terminal by using the instruments tool. The command is:
instruments -w <device id> -t <template> <application>
- When using the cli instruments for UI Automation you can now target the default Automation Template and pass the script and results path into the tool as environment variable options. For example:
instruments -w <device id> -t /Developer/Platforms/iPhoneOS.platform/Developer/Library/Instruments/PlugIns/AutomationInstrument.bundle/Contents/Resources/Automation.tracetemplate <application> -e UIASCRIPT <script> -e UIARESULTSPATH <results path>
- Starting in iOS 5 beta 3, the
UIControlhas returned to its original default value of
tableView:viewForHeaderInSection:method (or its footer equivalent) is no longer sufficient to hide a header. You must override
0.0to hide a header.
- In the iOS 5 beta, the
UITableViewclass has two methods to move one cell from one row to another with defined parameters. These APIs are:
- Using the
UIWebViewclass in Interface Builder, setting transparent background color is possible in iOS 5. Developers compiling against the new SDK can check their XIB for the
- In the iOS 5 beta, the
UITabBarimplementations have changed so that the
drawRect:method is not called on instances of these classes unless it is implemented in a subclass. Apps that have re-implemented
drawRect:in a category on any of these classes will find that the
drawRect:method isn’t called. UIKit does link-checking to keep the method from being called in apps linked before iOS 5 but does not support this design on iOS 5 or later. Apps can either:
- Use the customization API for bars that in iOS 5 and later, which is the preferred way.
UINavigationBar(or the other bar classes) and override
drawRect:in the subclass.
NSUInteger, so that these types match with methods defined on
- Touch events are not getting forwarded to the view in the
- We have changed the behavior of
UITableViewScrollPositionBottomnow adjust for the top and bottom portions of the
- In iOS 5, a new inherited CSS property,
-webkit-overflow-scrolling, is available. The value
touchallows the web developer to opt in to native-style scrolling in an
overflow:scrollelement. The default value for this property is
auto, which allows single-finger scrolling without momentum.
- NEW: In beta 5, accessing sites that use client side SSL certificates does not work and may cause the application to crash.
- The WebKit framework has picked up a newer WebKit engine, which closely matches Safari 5.1. Some areas to be aware of with the new WebKit framework on iOS:
- There is a new HTML5-compliant parser.
- Text layout width may change slightly because word-rounding behavior now has floating-point-based precision.
- There is improved validation of the
<input>form field, which includes removing leading zeros and number formatting.
- Touch events are now supported on input fields.
window.onerroris now supported.
- There is a new user agent that does not have locale information in the User Agent string.
- NEW: URLs are now canonicalized by making the scheme all lowercase. If a fake URL is used to pass information from a UIWebView back to native code, make sure that the scheme is always lowercase, or that the native code compares the scheme in a case-insensitive manner.
- In iOS 5 beta 4 and later, wireless syncing is now available on Windows as well as the Mac. (This support requires OS X 10.6.8 or Lion.) You will see an option to enable wireless syncing when you connect your device to iTunes with the USB cable. It is recommended you perform your initial sync with a cable after restoring your device.
- Wireless syncing is triggered automatically when the device is connected to power and on the same network as the paired computer. Or, you can manually trigger a sync from iTunes or from Settings > General > iTunes Sync (same network as paired computer required).
- If you find issues with apps, media and/or photos synced to your device, you can reset then resync. From Settings > General > Reset, choose Erase all Content and Settings. Then reconnect to iTunes and sync again.
- In some cases, your device may fail to sync contacts, calendars and account settings, or back up to iTunes. If this happens, reboot your device and re-sync.
- FIXED: In some cases, syncing photos may result in only thumbnails on your device. If this happens, unsync Photos then re-sync again.
- FIXED: In beta 4, device restores using Xcode were disabled. This has been fixed. Device restores are now enabled and work in Xcode.
- In some cases, Xcode 4.2 Organizer does not display a device that is in restore mode. As a workaround you can use iTunes to restore.
- In iOS 5 beta 5, iOS Simulator is not compatible with previous releases of the iCloud Developer Seed for OS X. It is highly recommended that you update to the latest iCloud Developer Seed to ensure compatibility.
- iOS 5.0 SDK supports both iOS 4.3 and iOS 5.0 simulators.
- NEW: Xcode fails to build a Page-based template. You can work around this issue by adding the Core Graphics framework to your project.
Buy Cheapest Related Product From Amazon.com
| « Previous |
Viatag RFID Transponders Developing For Cashless Parking System
| Next » |
iOS 5 Beta 5 Contains Speech-To-Text Feature